Label Dispenser Machine - LB2

Semi-automatic bottle labeler: the Tach-It LB-2 semi-automatic bottle and cylindrical product labeler is designed to meet the needs of growing companies, lower volume users, specialty packers or as a backup for fully automated equipment. Easy to use for any round bottle or container ranging from½ inch to 4 inch inch diameter, the LB-2 has built in product fixtures for consistent placement, automatic overhead pressure arm and can apply a front label or a front and back label (with alternating labels on the web), is built for 24/7 productivity, and has a powered rewind for the waste. The Tach-It LB-2 is designed to handle label rolls up to 12 inch in diameter on a 3 inch core and no special operator training is required as setup and controls are easy to use and understand. Unlike many other bottle labelers in the industry, the Tach-It LB-2 does not require air, has a small bench top design for use anywhere, requires no tools for label changeover and has high friction non-slip silicone rollers for positive feed of the labels and rotation of the product. To use the Tach-It LB-2 simply place the product into the adjustable cradle assembly and step on the foot pedal. The automatic overhead pressure arm will come down holding the container in place and the container will rotate and either 1 or 2 labels will be quickly applied. The machine is now ready for the next cycle. Note: all labels used on the LB-2 must be die-cut and have a minimum 1/8 inch (3mm) gap between labels.

specifications:
power: 110 volt (220 volt available) 3 amp Fuse

Machine: length—22.0in. (560 mm)
width— 12.9in. (330 mm)
height—21.2in. (540 mm)
weight—45 lbs. (20 kgs)

label core: 3in. (75mm) core size on label roll

Object size: maximum dia.—4in. (90mm)
minimum dia.—1/2in. (13mm)

label size: minimum width—3/8in. (10mm)
minimum length—3/4in. (20mm)
maximum width—6in. (150mm)
maximum length—9in. (230mm)

roll Capacity: 12in. (300mm) maximum roll dia.