Smipack BP802ARV 280R-P - Monoblock Automatic Shrink Wrapper with 90° Infeed and Sealing Bar

The BP series of monobloc semi-automatic and automatic shrink wrappers with sealing bar stands out for its versatility. Depending on the model, in fact, this range of packaging machines is particularly suitable for packing a very wide range of products belonging to different market sectors in film only or pad + film.

Equipped with 90° or in-line infeed, multi-push system and cutting-edge technology, these machines are perfectly and easily integrated into shrink film packaging lines. The BP Series can reach productions up to 25 packs/minute.

• Automatic shrink wrappers with 90° infeed
• Sliding protection doors with deceleration device
• Automatic pack collation
• Pad inserting device:
  • pneumatic vertical pad taking
  • pad stock 300 pcs
  • pad dimensions min. 200x120 mm max 500x350 mm
  • pad thickness: min 2.5 mm max 3.5 mm
  • motorized pad carrying, self centering, controlled by inverter and encoder
  • mechanical pad insertion under the pack controlled by inverter and encoder, synchronized with the arrival of the products
• Working modality: only film or pad + film
• Double-chamber tunnel
• 90° Infeed conveyor with adjustable speed controlled by inverter
• Product carrying by automatic left or right conveyor
• Available infeed lanes: 1, 2, 3
• Product presence, outfeed accumulation, infeed and outfeed obstruction photocells
• Infeed pneumatic press rod
• Pneumatic depressor
• Multi-thrust system
• Motorized pusher controlled by inverter and encoder
• Chain pusher located between the 90° infeed conveyor and the sealing bar controlled by inverter and encoder
• Pneumatic products guides, synchronized with the chain pusher, to facilitate the formation and transition of the pack over the sealing bar
• Motorized upper film unwinding controlled by inverter
• Motorized lower film unwinding
• Automatic, semiautomatic, pass through mode
• Included: feet for the machine fastening, press rod to stop products, cooling fan at the tunnel outlet
• Monoblock frame
• Pneumatic sealing bar equipped with safety sensors
• Pneumatic film cut by cold blade
• Rollers are positioned on the upper and lower unwinders to make the reels easier to load
• Metric graduation based fi lm reels centering system
• FLXMOD® control system equipped with:
  • operator Interface 7" full-colour touch screen sliding all along the length of the machine
  • Plc
  • inverter with integrated encoder reading
  • IN/OUT control modules
• 50 different memorisable working cycles
• Tunnel air flow adjustable by means of independent deflectors
• Tunnel conveyor equipped with heat-resistant glass fibre bars (SMI patent) which ensures that:
  • the conveyor stiffness grants stability to the products passing through, for a compact and well-shrunk pack
  • the conveyor can bear a product weight up to 30 kilos
  • the conveyor bars never get rusted, as it happens when using traditional metallic conveyors
  • the maintenance is easy and low-cost, thanks to the possibility of replacing just the worn out bars
• Oven cooling system
• Low power consumption
• 4.0 industry compliant
• Compliance with CE regulations