Air-Flow Vented Stretch Film
Air-Flow Vented Stretch Film

 

Air-Flow pallet wrap is a stretch film with die cut holes for ventilation. Air-Flow is a proven alternative that services the agricultural, industrial and manufacturing industries. Air-Flow comes in two die cut variations: Air-Flow Standard Film and Air-Flow Premium.

Air-Flow I

Die Cut, Vented Pallet Wrap with Extended Core Handles for Hand Application
Item # Width Length RL/CS CS/PLT  
WAF03 17" 1,000' 4 50

Air-Flow II

Die Cut, Vented Pallet Wrap on 3" Core Handles for Hand Application
Item # Width Length RL/CS CS/PLT  
WAF04 17" 3,000' 1 90

Air-Flow III

Die Cut, Vented Pallet Wrap for Machine Application
Item # Width Length RL/CS CS/PLT  
WAF02 17" 10,000' 1 40
WAF05 17" 5,000' 1 40


Air-Flow PREMIUM Vented Stretch Film

 

Quick Pak introduces Air-Flow pallet wrap, an amazing stretch film with die cut holes for ventilation. Air-Flow reduces spoilage that conventional stretch film can cause by eliminating condensation build up on the inside of the pallet wrap.

Air-Flow Premium can be prestretched up to 200% using existing prestretch equipment. Vented pallet wrap targets produce, dairy, beverage and frozen food industries.

Item # Width Length RL/CS CS/PLT  
WAF06-31 17" 3,100' 1 40


Can Air-Flow Solve Your Problems?

The following are examples where innovative packaging distributors solved their customers packaging problems. This resulted in increased sales, loyal customers and the satisfaction of a job well done:

Problem: Products are boxed and palletized when still warm. Condensation forms on the inside of the cling film and deteriorates the boxes.
Solution: Place pallets in cool down/holding area for 24 to 36 hours, or wrap the pallets with Air-Flow and eliminate the time and expense of the holding area.

Problem: A product has excessive moisture when produced and has to "cure" prior to being stretch wrapped
Solution: Wrap the pallet in Air-Flow and let the curing take place in transit.

Problem: Film breaks when tested on stretch wrapping machine.
Solution: Machine is probably set for stretch film with 150+% pre stretch. The best way is to change the pre stretch setting to 30%. Some machines will require a gear ratio change to achieve this 30%. You may want to switch to Air-Flow Premium which yields 200% stretch.

Problem: Customer wrapped pallet and the load did not hold up during shipping.
Solution: Air-Flow needs to be stretched more. Try to get a minimum stretch of 15% while wrapping. If a customer by-passes all of the rollers there will not be any stretch to sustain the load. Depending on product being wrapped, the customer may need to use a different grade of Air-Flow (Heavy Duty or Premium).

Problem: Customer cannot find the beginning of the roll when hand wrapping.
Solution: When finished wrapping a pallet, the operator should walk away from the pallet three feet, grab, cut and tie the film. Their needs to be a little more care to wrapping with Air-Flow instead of stretch film to keep from wasting product.